Common Water Heater Problems And Troubleshooting Tips

A warm shower or a cozy bath – these simple pleasures of daily life are made possible by a functional water heater. However, like any household equipment, water heaters can encounter problems that disrupt this comfort. At R.J. Kielty Plumbing, Heating & Cooling Inc., we understand the importance of a properly functioning water heater, and we’re here to help you troubleshoot common water heater problems that may arise. In this blog, we’ll explore some typical water heater problems and provide valuable troubleshooting tips to ensure your hot water supply remains uninterrupted.

Need Assistance With Common Water Heater Problems? Let Us Help!

No Hot Water: Check for Tripped Circuit Breaker or Pilot Light Issues

One of the most common water heater problems that homeowners encounter is the lack of hot water. It can be quite frustrating, but before you start panicking and reaching out to a professional, there are a couple of things you can check on your own.

First, take a look at your circuit breaker to see if it has tripped. Sometimes, a simple reset of the circuit breaker can resolve the issue and restore hot water to your taps. Another potential culprit could be the pilot light. Check to see if it is lit and functioning properly. If not, relighting the pilot light might be all it takes to get your hot water flowing again. By troubleshooting these common issues, you can potentially save time and money by resolving the problem yourself.

Inadequate Hot Water: Adjust the Thermostat or Inspect for Sediment Buildup

If your water heater is producing less hot water than usual, it could be due to a variety of reasons. Insufficient heating may result from a faulty thermostat, a damaged dip tube, or sediment buildup. Begin by checking the thermostat settings, ensuring they are at the recommended temperature.
A damaged or worn-out dip tube can also affect hot water distribution. The dip tube directs cold water to the bottom of the tank for heating. If it’s compromised, cold water may mix with the hot water supply prematurely. In such cases, replacing the dip tube is the solution.

Strange Sounds: Drain the Tank to Remove Sediment or Flush the System

Gurgling, popping, or banging sounds emanating from your water heater can be alarming. These noises are often caused by the heating element boiling water trapped beneath sediment. The overheating process generates steam, resulting in these unsettling sounds.
To address this, perform a flushing of the water heater tank. Drain the tank to remove sediment and prevent future buildup. Regular maintenance like this can ensure the longevity of your water heater and maintain its efficiency.

Water Leaks: Inspect for Loose Connections or Faulty Pressure Relief Valve

Water leaking from your water heater demands immediate attention. Leaks can be caused by a variety of issues, such as a loose valve, a damaged temperature and pressure relief (TPR) valve, or corrosion. Check for visible signs of leakage around the tank and its connections.
If the TPR valve is the culprit, it may need replacement. This valve releases excess pressure to prevent the tank from bursting. A leaking TPR valve suggests a potential overpressure situation, and it should be addressed promptly.

Foul Odors: Flush Tank to Eliminate Bacteria Growth

A foul odor in your hot water could be an indication of bacteria in the tank. Bacteria thrive in warm environments and produce a distinct, unpleasant odor. Flushing the tank with a solution of hydrogen peroxide and water can help eliminate bacteria and neutralize odors. It’s essential to follow manufacturer recommendations and safety guidelines when performing this task.

Rusty Water: Anode Rod Replacement May Be Needed

Discovering rust-colored water flowing from your tap is a cause for concern. Rust is a sign of corrosion within the water heater tank. Over time, the tank’s interior can deteriorate, leading to leaks and reduced efficiency.

To address rust-colored water, inspect the anode rod. The anode rod is designed to attract corrosion, protecting the tank from rust. If the rod is severely corroded, it needs replacement. Regularly checking and replacing the anode rod can significantly extend the lifespan of your water heater.

Need Professional Help? Don't Hesitate to Contact Us Today

A well-maintained water heater is essential for the comfort and functionality of your home. By understanding common water heater problems and implementing these troubleshooting tips, you can ensure your water heater operates efficiently and reliably. However, if you encounter persistent issues or need professional assistance, feel free to contact R.J. Kielty Plumbing, Heating & Cooling Inc.

Our experienced technicians are ready to address your water heater concerns and provide solutions to keep your hot water flowing seamlessly. We stay updated with the latest industry trends and use cutting-edge technology to diagnose and resolve issues promptly. Don’t let water heater problems disrupt your daily routine – call us today for expert water heater repair in Orlando and enjoy the comfort of a reliable hot water supply.