Iron Filtration Services in New Port Richey, FL

A whole-house iron filter treats water at the point of entry, so every tap, shower, and appliance in your property receives filtered water. R.J. Kielty installs air-injection oxidizing (AIO) filters, specialized media filters, and combined iron/sulfur systems based on your water chemistry and flow rate requirements.

AIO systems work by introducing air into the water stream, which oxidizes dissolved ferrous iron into ferric particles that the filter media can trap. This approach handles iron concentrations commonly found in West Central Florida wells, typically between 1 and 10 parts per million. For properties with both iron and hydrogen sulfide (rotten-egg smell), we install dual-purpose systems that address both contaminants in a single unit.

We size every system to match your household or building's peak water demand. An undersized filter restricts flow and shortens media life. An oversized system wastes water during backwash cycles. Getting the sizing right matters, and it starts with accurate water testing.

Iron filtration systems need periodic maintenance to perform correctly. Filter media loses its oxidizing capacity over time, control valves can malfunction, and air injectors may clog with sediment or mineral deposits.

R.J. Kielty's technicians diagnose and repair all major brands of iron filters. Common service calls include replacing worn media beds, recalibrating backwash cycles, repairing or replacing control heads, and clearing clogged injectors. We also inspect integration points with existing water softeners to confirm both systems work together without conflict.

Regular maintenance extends the life of your equipment and prevents the return of iron staining between service visits. We recommend annual inspections for most residential systems and semi-annual checkups for high-demand commercial applications.

Accurate water testing is the first step in any iron filtration project. Iron exists in water in several forms, ferrous (dissolved/clear water iron), ferric (oxidized/red water iron), and bacterial iron (produced by iron-reducing bacteria). Each type requires a different treatment approach.

Our technicians collect water samples on-site and test for iron concentration, pH, hardness, manganese, sulfur, and total dissolved solids. These results tell us which type of iron filtration system will work best for your property. A home with 3 ppm of ferrous iron and a pH of 7.2 needs a very different setup than one with 8 ppm of ferric iron and bacterial contamination.

We provide clear, written test results and walk you through what the numbers mean before recommending any equipment.

Older iron filtration systems may no longer keep up with your water quality needs. Media beds degrade, older control valves waste water during backwash, and some legacy systems simply weren't designed for the iron concentrations found in Florida groundwater.

R.J. Kielty replaces outdated iron filters with modern, high-efficiency systems that use less water, backwash more effectively, and last longer between media changes. If your current system was installed more than 10–15 years ago, an upgrade can deliver noticeably better water quality and lower operating costs.

We also integrate new iron filtration systems with existing water softeners, UV disinfection units, and reverse osmosis systems to give you comprehensive water treatment from a single service provider.